TOP DEAL
JET JTS-600X-M Table saw
JTS-600X-M1.694,62 €incl. VAT
1.424,05 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC 371ELB Bench drilling machine
Item number371ELB
831,81 € gross699,00 € netincl. VAT · Shipping costs
The PROMAC 371ELB is a pillar drill for mounting on a workbench or stand. With 0.75 kW, 12 speeds and a 20 mm drilling capacity it suits drilling work in workshops, trades and training.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC 371ELB is designed for drilling work in workshops, trades, maintenance and schools. It is fixed to a rigid, distortion-free workbench or a stand and drills holes up to 20 mm in diameter.
It is driven by a 400 V three-phase motor with an output of 0.75 kW. Stepped pulleys provide 12 speeds from 290 to 2300 rpm, so the speed can be matched to the material and drill diameter. The MT2 spindle has a stroke of 85 mm and the throat depth is 178 mm.
The 80 mm column and the machine head made of aged grey cast iron give the machine the required rigidity. The 267 × 267 mm table with 14 mm T-slots swivels through 360°, and the spindle is fed directly by hand. The machine is supplied with an operating manual.
Features at a glance
- 12 speeds from 290 to 2300 rpm via stepped pulleys
- MT2 spindle taper, 85 mm spindle stroke
- 178 mm throat depth
- Ø 80 mm column, grey cast iron head
- 267 × 267 mm table, swivels through 360°
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 400 V, 50 Hz |
| Phases | 3 |
| Power cord | H05VV-F 4G 1.0 mm² |
| Motor output | 0.75 kW |
| Installation fuse | min. 10 A |
| Capacities | |
| Drilling capacity | 20 mm |
| Spindle taper | MT2 |
| Throat depth | 178 mm |
| Spindle stroke | 85 mm |
| Number of speeds | 12 |
| Spindle speeds | 290 / 380 / 460 / 540 / 600 / 740 / 1100 / 1200 / 1300 / 1650 / 1750 / 2300 rpm |
| Quill diameter | 52 mm |
| Column diameter | 80 mm |
| Spindle nose to table | 420 mm |
| Spindle nose to base | 570 mm |
| Table | |
| Table size | 267 × 267 mm |
| Table swivel | 360° |
| Base plate | 280 × 500 mm |
| T-slot width | 14 mm |
| Dimensions | |
| Dimensions (L × W × H) | 630 × 300 × 1040 mm |
| Weight | |
| Net weight | 74 kg |
| Further data | |
| Sound pressure level (normal operation) | below 70 dB |
Scope of delivery
- PROMAC 371ELB drill press
- Operating manual
Technical data
Additional data
- Intended use
- precision drilling in machinable metals and suitable plastics
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC 371ELB bench drill. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service