TOP DEAL
JET JTS-600X-M Table saw
JTS-600X-M1.694,62 €incl. VAT
1.424,05 € net, VAT extra · plus shipping costs
VIEW OFFER 
Baileigh TN-200E tube notcher
Item numberTN-200E
4.219,00 € gross3.545,38 € netincl. VAT · Shipping costs
The Baileigh TN-200E is an electric pipe notcher with 8 stations for SCH 40 pipe from DN 8 to DN 50, driven by a 1.5 kW motor.
Available for pre-orderExpected availability from 30/11/2026. Transit time is additional.
Delivery / availability: Available for pre-order · Expected availability from 30/11/2026. Transit time is additional. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Customer groupPurchase: businesses and private customers
In use
Overview
The Baileigh TN-200E is an electric pipe notcher for metal fabrication, railing construction and pipework. It notches SCH 40 pipe in 8 stations from DN 8 to DN 50 at a fixed angle of 90°, with a maximum wall thickness of 3.3 mm. Suitable materials are carbon steel and non-ferrous metals such as aluminium and copper.
A 1.5 kW fan-cooled induction motor drives an eccentric shaft through a gear reducer, moving the cutter up and down on the nibbler principle. The pipe end is inserted into the matching station, and difficult areas such as weld seams are cut in two or more passes. The scrap falls out through the bottom of the machine.
A magnetic switch and a circuit breaker with reset button protect operator and motor. The gearbox holds 2.0 l of oil. With overall dimensions of 820 × 381 × 356 mm and a net weight of 98 kg, the machine can be mounted on a reinforced workbench.
Features at a glance
- 8 notching stations DN 8 to DN 50, SCH 40 pipe
- Notching angle 90°, wall thickness up to 3.3 mm
- Motor output 1.5 kW
- Gear reducer with eccentric shaft, nibbler principle
- Magnetic switch and overload protection with reset button
- Net weight 98 kg
Technical data
Electrical data
- Power supply
- 230 V / 50 Hz / 1 phase
- Output power
- 1.5 kW (2 HP)
- Motor type
- totally enclosed fan-cooled induction motor, capacitor start
- Switch
- magnetic switch
- Overload protection
- circuit breaker with reset button
Machining data
- Notching stations
- 8
- Notching angle
- 90°, fixed
- Notching capacity pipe SCH 40
- DN 8 / DN 10 / DN 15 / DN 20 / DN 25 / DN 32 / DN 40 / DN 50 (1/4 to 2 in)
- Max. wall thickness
- 3.3 mm
- Materials
- carbon steel and non-ferrous metals (aluminium / copper)
Additional data
- Power transmission
- direct drive to gear reducer and eccentric shaft
- Gear oil capacity
- 2.0 l
- Noise emission without load
- below 55 dB
- Reference tensile strength
- mild steel 441 N/mm²
Dimensions
- Overall dimensions (L × W × H)
- 820 × 381 × 356 mm
- Shipping dimensions (L × W × H)
- 914 × 406 × 457 mm
Weight
- Net weight
- 98 kg
- Shipping weight
- 112 kg
Delivery & scope of delivery
Scope of delivery
- Baileigh TN-200E electric pipe notcher
- Operating manual
Downloads
Operating manuals and spare-parts listsProduct safety
Crushing, shearing, cutting, punching and entanglement hazards at tooling, rolls and moving machine parts. Handle sharp and heavy workpieces safely. Trained operators only; never exceed rated capacities.
Secure the machine and use it only within the material and capacity limits stated in the manual. Guide or support the workpiece safely. Keep hands clear of bending, pressing, cutting, punching and pinch zones and use suitable handling aids. Wear eye protection, safety footwear and cut-resistant gloves when handling material. Stop the machine and isolate all energy sources before adjustment, tooling changes, cleaning or maintenance.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Tool France SAS9 rue des Pyrénées91090 LissesFranceService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service