TOP DEAL
JET JWBS-18-M Band saw
JWBS-18-M2.831,01 €incl. VAT
2.379,00 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC GH-1440K-T Metal lathe
Item numberGH-1440K-T
12.969,81 € gross10.899,00 € netincl. VAT · Shipping costs
The PROMAC GH-1440K-T is an engine lathe for turning and drilling machinable metals and plastics. Distance between centres 920 mm, swing over bed 360 mm, main drive 2.2 kW (3 HP).
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC GH-1440K-T Metal lathe is designed for turning and drilling operations on securely clamped machinable metals and suitable plastics. Coolant support for suitable applications. Digital display for controlled settings. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 400 V ~ 3 Ph, 50 Hz |
| Phases | 3 |
| Output power S1 | 2.2 kW (3 HP) |
| Operating current | 5 A |
| Power cord | H07RN-F 4 × 1.5 mm² |
| Capacities | |
| Swing over bed | 360 mm |
| Swing over bed gap | 520 mm |
| Swing over cross slide | 210 mm |
| Distance between centres | 920 mm |
| Bed width | 260 mm |
| Spindle nose | DIN 55029 (Camlock) D1-4 |
| Spindle taper | MT5 |
| Spindle bore | 38 mm |
| Number of spindle speeds | 12 |
| Spindle speed range | 40 – 1800 rpm |
| Tailstock ram travel | 120 mm |
| Tailstock quill diameter | 45 mm |
| Tailstock taper | MT3 |
| Steady rest capacity | 5 – 90 mm |
| Follow rest capacity | 10 – 70 mm |
| Cross slide travel | 175 mm |
| Top slide travel | 98 mm |
| Max. tool size | 16 × 16 mm |
| Lead screw pitch | 4 mm |
| Longitudinal feeds (41) | 0.043 – 0.653 mm/rev |
| Cross feeds (39) | 0.024 – 0.359 mm/rev |
| Metric threads (37) | 0.4 – 7 mm |
| Inch threads (28) | 4 – 56 TPI |
| Dimensions | |
| Dimensions | 1930 × 765 × 1250 mm |
| Weight | |
| Net weight | 959 kg |
| Further data | |
| Coolant tank capacity | 15 l |
| Sound pressure level (idle at max. speed) | LpA 78.4 dB(A) |
Scope of delivery
- PROMAC GH-1440K-T engine lathe
- Cast iron stand
- 6 × leveling pad
- Pull-out chip tray
- Splash guard
- 3-jaw universal chuck 160 mm
- 4-jaw independent chuck 200 mm
- Faceplate 300 mm
- Four-way tool post
- Steady rest
- Follow rest
- Foot brake
- Coolant system
- LED work light
- Set of change gears
- 2 × MT3 fixed centre
- MT3/MT5 centre sleeve
- Threading dial
- Operating tools in tool box
- Oil can
- Operating manual
- Spare parts list
Technical data
Additional data
- Intended use
- Dreh- und Bohrarbeiten an sicher gespannten, zerspanbaren Metallen und geeigneten Kunststoffen
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, crushing and impact hazards at the chuck, workpiece and spindle. Remove the chuck key, avoid loose clothing and wait for a complete stop before measuring or setting up.
Product safety – PROMAC GH-1440K-T metal lathe. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Securely fasten the workpiece and workholding devices, remove the chuck key, close guards and never wear gloves near rotating parts; secure long bars against whipping.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service