TOP DEAL
JET JTS-600X-M Table saw
JTS-600X-M1.694,62 €incl. VAT
1.424,05 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC MDA-100S Magnetic drilling machine
Item numberMDA-100S
1.724,31 € gross1.449,00 € netincl. VAT · Shipping costs
The PROMAC MDA-100S is a magnetic drill for core drilling Ø 12 – 100 mm in magnetisable materials, usable horizontally, vertically and overhead. Magnetic adhesion 2500 kg, motor 1800 W.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC MDA-100S Magnetic drilling machine is designed for mobile core and solid drilling operations on magnetisable steel structures. Robust workshop design. Performance data in accordance with the original PROMAC documentation. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Benefits
- robuste Werkstattausführung
- Powersdaten gemäß PROMAC-Originalunterlage
Technical data
Electrical data
- Voltage
- 220 – 240 V, 50 – 60 Hz
- Phases
- 1
- Protection class
- I
- Input power motor
- 1.8 kW
- Input power total
- 1.95 kW
Machining data
- Annular cutting
- Ø 12 – 100 mm
- Twist drilling
- Ø 1 – 31.75 mm
- Tapping
- M3 – M30
- Milling
- Ø 10 – 105 mm
- Stroke
- 260 mm
- Gear stages
- 4
- No-load speed (variable)
- 40 – 110 / 65 – 180 / 140 – 380 / 220 – 610 rpm
- Speed under load (1800 W)
- 85 / 152 / 270 / 480 rpm
- Tool holder
- MT3, Weldon arbor 19.05 mm (3/4 in)
- Forward/reverse
- Yes
- Magnet base (L × W × H)
- 220 × 110 × 64 mm
- Magnetic adhesion force
- 2500 kg
- Working position
- Horizontal, vertical or overhead
Additional data
- Magnet indicator
- LED
- Intended use
- mobile core and solid drilling on magnetisable steel structures
- Product type
- Machine
Dimensions
- Dimensions (L × W × H)
- 340 × 310 × 510 – 710 mm
Weight
- Weight
- 28 kg
Delivery & scope of delivery
Scope of delivery
- PROMAC MDA-100S magnetic drill
- Safety guard
- 3 × feed handle
- Hex keys 2.5 / 4 / 5 / 6 mm
- Locking pin
- Lubrication system
- Safety chain
- Arbor MT3 – Weldon 19.05 mm (3/4 in) with lubrication ring
- Morse taper drift key
- Operating manual
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC MDA-100S magnetic drill. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service