TOP DEAL
JET JTS-600X-M Table saw
JTS-600X-M1.694,62 €incl. VAT
1.424,05 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC MDA-50S Magnetic drilling machine
Item numberMDA-50S
921,06 € gross774,00 € netincl. VAT · Shipping costs
The PROMAC MDA-50S is a magnetic drill for core drilling Ø 12 – 50 mm in magnetisable materials, usable horizontally, vertically and overhead. Magnetic adhesion 1600 kg, motor 1200 W.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC MDA-50S Magnetic drilling machine is designed for mobile core and solid drilling operations on magnetisable steel structures. Quick-clamping equipment for efficient workpiece handling. Coolant support for suitable applications. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 220 – 240 V AC, 50 – 60 Hz |
| Phases | 1 |
| Protection class | I |
| Input power motor | 1.2 kW |
| Input power total | 1.25 kW |
| Capacities | |
| Annular cutting | Ø 12 – 50 mm |
| Twist drilling | Ø 1 – 20 mm |
| Milling | Ø 10 – 50 mm |
| Stroke | 170 mm |
| Gear stages | 2 |
| No-load speed | 380 / 690 rpm |
| Speed under load | 235 / 425 rpm |
| Tool holder | Weldon 19.05 mm (3/4 in) |
| Magnet base (L × W × H) | 168 × 84 × 49 mm |
| Magnetic adhesion force | 1600 kg |
| Working position | Horizontal, vertical or overhead |
| Dimensions | |
| Dimensions (L × W × H) | 320 × 210 × 385 – 550 mm |
| Weight | |
| Weight | 13.5 kg |
| Further data | |
| Magnet indicator | LED |
Scope of delivery
- PROMAC MDA-50S magnetic drill
- Drill guard
- 3 × feed handle
- Hex keys 2.5 / 3 / 4 / 5 mm
- Lubrication system
- Safety chain
- Operating manual
Technical data
Additional data
- Intended use
- mobile core and solid drilling on magnetisable steel structures
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC MDA-50S magnetic drill. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service