TOP DEAL
JET JTS-600X-M Table saw
JTS-600X-M1.694,62 €incl. VAT
1.424,05 € net, VAT extra · plus shipping costs
VIEW OFFER 
Baileigh DP-1500G drill press
Item numberDP-1500G
5.710,81 € gross4.799,00 € netincl. VAT · Shipping costs
The Baileigh DP-1500G is a gear head drill press with 38.1 mm drilling capacity, 33 mm tapping capacity, 2.2 kW motor, 8 speeds and power feed.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The Baileigh DP-1500G is a gear head drill press for drilling and tapping in metal fabrication, machine building, maintenance and training. A 2.2 kW (3 HP) three-phase motor drives the MT4 spindle through the gearbox in 8 steps from 108 to 1800 rpm.
Drilling capacity is 38.1 mm, tapping capacity 33 mm and quill travel 190 mm. The power feed offers selectable feed rates and a tool ejector releases the tool from the spindle. The table measures 508 × 406 mm with 14.6 mm T-slots, the base 495 × 711 mm.
An integrated coolant pump (75 W) supplies the tool. A drift key and the operating manual are supplied. Shipping weight is 437 kg.
Features at a glance
- Gear head with 8 speeds 108 – 1800 rpm
- Drilling 38.1 mm, tapping 33 mm
- MT4 spindle, quill travel 190 mm
- Power feed with selectable rates
- Table 508 × 406 mm with T-slots
- Integrated coolant pump
Technical data
Electrical data
- Power supply
- 400 V / 50 Hz / 3 phases
- Motor output
- 2.2 kW (3 HP)
- Coolant pump
- 75 W
Machining data
- Drilling capacity
- 38.1 mm
- Tapping capacity
- 33 mm
- Spindle speeds
- 108 / 162 / 240 / 360 / 528 / 805 / 1175 / 1800 rpm
- Spindle taper
- MT4
- Spindle travel
- 190 mm
Table
- Table size (L × W)
- 508 × 406 mm
- T-slot width
- 14.6 mm
- Base size (L × W)
- 495 × 711 mm
Dimensions
- Shipping dimensions (L × W × H)
- 2185 × 584 × 940 mm
Weight
- Shipping weight
- 437 kg
Delivery & scope of delivery
Scope of delivery
- Baileigh DP-1500G gear head drill press
- Manual tool ejector (drift)
- Operating manual
Downloads
Operating manuals and spare-parts listsProduct safety
Rotating or cutting parts: entanglement, cutting, impact and workpiece-ejection hazards. Observe chips, sparks, dust and noise. Trained operators only; never exceed rated capacities.
Install the machine securely and operate it in accordance with the manual. Clamp the workpiece and tool correctly, use all guards and check the work area before starting. Wear eye or face protection, hearing protection and respiratory protection where required. Keep loose clothing, jewellery and long hair away from rotating parts. Switch off, isolate all energy sources and wait for a complete stop before setup, cleaning, fault removal or tool changes.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Tool France SAS9 rue des Pyrénées91090 LissesFranceService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service