TOP DEAL
JET JTS-600X-M Table saw
JTS-600X-M1.694,62 €incl. VAT
1.424,05 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC 212 Bench drilling machine
Item number212
403,41 € gross339,00 € netincl. VAT · Shipping costs
The PROMAC 212 is a compact pillar drill for mounting on a workbench or stand. It drills up to 16 mm and offers 5 speeds from 490 to 2510 rpm.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC 212 is a compact pillar drill for workshops, trades, hobby use and training. It is mounted on a rigid workbench or a stand and is designed for holes up to 16 mm in diameter.
The 0.37 kW, 230 V motor is connected via a mains plug. Stepped pulleys provide 5 speeds from 490 to 2510 rpm. The MT2 spindle has a stroke of 80 mm and the throat depth is 168 mm.
The column has a diameter of 73 mm and the machine head is made of aged grey cast iron. The table measures 265 × 265 mm and has 12 mm T-slots, and the distance from spindle nose to table is 445 mm. The machine is supplied with an operating manual.
Features at a glance
- 5 speeds from 490 to 2510 rpm
- MT2 spindle taper, 80 mm spindle stroke
- 168 mm throat depth
- 265 × 265 mm table with 12 mm T-slots
- 230 V connection with mains plug
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 230 V, 50 Hz |
| Phases | 1 |
| Motor output | 0.37 kW |
| Power cord | H05VV-F 1.5 mm², with mains plug |
| Installation fuse | min. 10 A |
| Capacities | |
| Drilling capacity | 16 mm |
| Spindle taper | MT2 |
| Throat depth | 168 mm |
| Spindle stroke | 80 mm |
| Number of speeds | 5 |
| Spindle speeds | 490 / 800 / 1200 / 1720 / 2510 rpm |
| Spindle nose to table | 445 mm |
| Spindle nose to base | 640 mm |
| Quill diameter | 40 mm |
| Column diameter | 73 mm |
| Table | |
| Table size | 265 × 265 mm |
| T-slot width | 12 mm |
| Dimensions | |
| Dimensions | 970 × 320 × 560 mm |
| Weight | |
| Net weight | 45 kg |
| Further data | |
| Sound pressure level (idle) | below 70 dB(A) |
Scope of delivery
- PROMAC 212 drill press
- Operating manual
Technical data
Additional data
- Intended use
- precision drilling in machinable metals and suitable plastics
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC 212 bench drill. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service