TOP DEAL
JET JTS-600X-M Table saw
JTS-600X-M1.694,62 €incl. VAT
1.424,05 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC 300Z Pedestal with extraction for bench grinder
Item number300Z
891,31 € gross749,00 € netincl. VAT · Shipping costs
The PROMAC 300Z is a stand with integrated dust extraction for PROMAC metal grinders. It extracts grinding dust directly at the machine and collects it in a dust bag. Motor 0.38 kW, 230 V.
Available
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC 300Z is a universal stand for mounting PROMAC metal grinders. It extracts the grinding dust directly at the machine. The grinder itself is not included.
The 0.38 kW fan unit is connected to 230 V via a mains plug. The grinder is connected via 2 extraction ports of Ø 100 mm with adapters from 36 to 100 mm. The dust is collected in a dust bag inside the stand.
Supplied with 2 adapters 36 – 100 mm, 2 aluminium hoses Ø 100 mm, a Ø 100 mm Y-piece with cover, the matching hose clamps and the operating manual. The stand weighs 37 kg.
Features at a glance
- Stand for PROMAC metal grinders
- Integrated extraction, 0.38 kW motor
- 2 extraction ports Ø 100 mm, adapters 36 – 100 mm
- Dust bag inside the stand
- Hoses, Y-piece and clamps included
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 230 V, 50 Hz |
| Phases | 1 |
| Motor output | 0.38 kW |
| Power cord | H05VV-F 3 × 1.0 mm², mains plug 230 V / 10 A |
| Installation fuse | 10 A |
| Dust extraction | |
| Extraction connections | 2 × Ø 100 mm, adapter 36 – 100 mm |
| Filter | dust bag inside the stand |
| Dimensions | |
| Dimensions (W × L × H) | 490 × 470 × 870 mm |
| Weight | |
| Net weight | 37 kg |
| Further data | |
| Sound pressure level (idle) | below 70 dB(A) |
Scope of delivery
- PROMAC 300Z stand with dust extraction (grinder not included)
- 2 × adapter 36 – 100 mm
- 2 × hose clamp Ø 36 mm
- 2 × aluminium hose Ø 100 mm
- 4 × hose clamp Ø 100 mm
- 1 × Y-piece Ø 100 mm with cover
- Operating manual
Technical data
Additional data
- Intended use
- den stationären Betrieb eines geeigneten Schleifbocks mit integrierter Absaugunterstützung
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Hazards from abrasive breakage, sparks, entanglement and dust. Use guards and dust extraction and fully disconnect from the mains before maintenance.
Product safety – PROMAC 300Z grinder stand with extraction. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Operate the grinding machine and extraction system only in the intended combination; check guards, rests and the extraction path, and remove dust deposits only with the power disconnected.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service