TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC 214AB Pillar drilling machine
Item number214AB
1.248,31 € gross1.049,00 € netincl. VAT · Shipping costs
The PROMAC 214AB is a floor-standing pillar drill with a 26 mm drilling capacity in steel, MT3 spindle taper and 12 speeds from 150 to 2840 rpm.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC 214AB is a floor-standing pillar drill for workshops, metalworking, maintenance and training. With a drilling capacity of 26 mm in steel and a throat depth of 280 mm it also handles larger hole diameters and workpieces.
The 400 V three-phase motor delivers 0.75 kW. Stepped pulleys provide 12 speeds from 150 to 2840 rpm. The MT3 spindle with a 62 mm quill has a stroke of 115 mm.
The 92 mm column and the machine head made of high-density aged grey cast iron provide rigidity and accuracy. The table measures 428 × 475 mm and has 12 mm T-slots, and the distance from spindle nose to table is up to 690 mm. The machine is supplied with an operating manual.
Features at a glance
- Drilling capacity in steel 26 mm
- 12 speeds from 150 to 2840 rpm
- MT3 spindle taper, 115 mm spindle stroke
- Ø 92 mm column, 280 mm throat depth
- 428 × 475 mm table with 12 mm T-slots
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 400 V, 50 Hz |
| Phases | 3 |
| Power cord | with mains plug |
| Motor output | 0.75 kW |
| Installation fuse | min. 10 A |
| Capacities | |
| Drilling capacity in steel | 26 mm |
| Spindle taper | MT3 |
| Throat depth | 280 mm |
| Spindle stroke | 115 mm |
| Number of speeds | 12 |
| Speed range | 150 – 2840 rpm |
| Spindle nose to table | 690 mm |
| Spindle nose to base | 1220 mm |
| Quill diameter | 62 mm |
| Column diameter | 92 mm |
| Table | |
| Table size | 428 × 475 mm |
| T-slot width | 12 mm |
| Dimensions | |
| Dimensions (H × W × D) | 1750 × 460 × 840 mm |
| Weight | |
| Net weight | 164 kg |
| Further data | |
| Sound pressure level (normal operation) | below 70 dB |
Scope of delivery
- PROMAC 214AB drill press
- Operating manual
Technical data
Additional data
- Intended use
- stationary drilling in machinable metals and suitable plastics
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC 214AB pillar drill. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service