TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC 309C Metal circular saw
Item number309C
950,81 € gross799,00 € netincl. VAT · Shipping costs
The PROMAC 309C is a dry-cut metal saw with a Ø 355 mm carbide blade and 2200 W input power for workshops, metalworking and locksmithing. Cutting capacity 90° Ø 130 mm, mitres up to 45°.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC 309C Metal circular saw is designed for precise cut-off and mitre cuts in securely clamped metal profiles. Robust workshop design. Performance data in accordance with the original PROMAC documentation. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 230 V ~ 1/N/PE, 50 – 60 Hz |
| Phases | 1 |
| Input power | 2.2 kW |
| Operating current | 9.5 A |
| Power cord | H07RN-F 3 × 1.5 mm² |
| Installation fuse | 16 A |
| Capacities | |
| Saw blade | Ø 355 × 2.4 × Ø 25.4 mm |
| No-load speed | 1300 rpm |
| Cutting capacity 90° round | Ø 130 mm |
| Cutting capacity 90° square | 120 × 120 mm |
| Cutting capacity 90° rectangular | 185 × 95 mm |
| Cutting capacity 45° round | Ø 90 mm |
| Cutting capacity 45° square | 55 × 55 mm |
| Cutting capacity 45° rectangular | 95 × 55 mm |
| Dimensions | |
| Dimensions (L × W × H) | 600 × 340 × 630 mm |
| Weight | |
| Net weight | 24 kg |
| Further data | |
| Sound pressure level (cutting) | LpA 102.9 dB(A) |
Scope of delivery
- PROMAC 309C dry-cut metal saw
- Vise
- Carbide-tipped saw blade Ø 355 mm, 70 teeth
- Operating wrench
- Operating manual
- Spare parts list
Technical data
Additional data
- Intended use
- präzise Trenn- und Gehrungsschnitte in sicher gespannten Metallprofilen
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Severe cutting and amputation hazards and risks from tool breakage and workpiece ejection. Clamp the workpiece, use guards and fully disconnect from the mains before changing tools.
Product safety – PROMAC 309C metal circular saw. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely, correctly adjust guards and guides and keep hands out of the cutting line; remove offcuts only after a complete stop. Do not saw magnesium.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service