TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC 372E Pillar drilling machine
Item number372E
1.159,06 € gross974,00 € netincl. VAT · Shipping costs
The PROMAC 372E is a floor-standing pillar drill for workshops, trades and training. It drills up to 20 mm and offers 12 speeds from 290 to 2300 rpm.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC 372E is a floor-standing pillar drill for drilling work in workshops, trades, maintenance and schools. It stands directly on the floor and needs no workbench. The drilling capacity is 20 mm.
The 230 V motor delivers 0.75 kW. Stepped pulleys provide 12 speeds from 290 to 2300 rpm. The MT2 spindle has a stroke of 85 mm and the throat depth is 178 mm.
An 80 mm column and a machine head made of aged grey cast iron form a rigid structure. The table or head can be adjusted in height via rack and crank, and the 290 × 330 mm table has 14 mm T-slots. The machine is delivered assembled, together with the operating manual.
Features at a glance
- Floor-standing model, delivered assembled
- 12 speeds from 290 to 2300 rpm
- MT2 spindle taper, 85 mm spindle stroke
- Height adjustment via rack and crank
- 290 × 330 mm table with 14 mm T-slots
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 230 V, 50 Hz |
| Phases | 1 |
| Power cord | H05VV-F 0.75 mm², with mains plug |
| Motor output | 0.75 kW |
| Installation fuse | min. 10 A |
| Capacities | |
| Drilling capacity | 20 mm |
| Spindle taper | MT2 |
| Throat depth | 178 mm |
| Spindle stroke | 85 mm |
| Number of speeds | 12 |
| Spindle speeds | 290 / 380 / 460 / 540 / 600 / 740 / 1100 / 1200 / 1300 / 1650 / 1750 / 2300 rpm |
| Quill diameter | 52 mm |
| Column diameter | 80 mm |
| Spindle nose to base | 480 mm |
| Table | |
| Table size | 290 × 330 mm |
| Height adjustment | table or head via rack and crank |
| T-slot width | 14 mm |
| Dimensions | |
| Dimensions (L × W × H) | 630 × 350 × 1840 mm |
| Weight | |
| Net weight | 98 kg |
| Further data | |
| Sound pressure level (normal operation) | below 70 dB |
Scope of delivery
- PROMAC 372E drill press (supplied assembled)
- Operating manual
Technical data
Additional data
- Intended use
- stationary drilling in machinable metals and suitable plastics
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC 372E pillar drill. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service