TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC PB-50-3H Section bending machine
Item numberPB-50-3H
12.374,81 € gross10.399,00 € netplus Shipping costs
The PROMAC PB-50-3H is a section bending machine with three driven rolls for bending bars, tubes and profiles. Shaft diameter 50 mm, hydraulic top roll adjustment.
On requestStock on request
Stock sourceStock on request
Customer groupEnquiry only
In use
Overview
The PROMAC PB-50-3H Section bending machine is designed for cold bending of suitable bars, tubes and structural sections. Robust workshop design. Performance data in accordance with the original PROMAC documentation. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 3 × 400 V, 50 Hz |
| Phases | 3 |
| Output power | 1.5 kW |
| Motor speed | 1400 rpm |
| Rated current | 3.5 A (400 V) / 6.1 A (230 V) |
| Mains connection | Cable 5 × 2.5 mm², CEE plug 32 A 5-pin, fuse 20 A type C, residual current device |
| Capacities | |
| Shaft diameter | 50 mm |
| Roll diameter | 150 mm |
| Roll speed | 10 rpm |
| Top roll adjustment travel | 120 mm |
| Top roll adjustment | Hydraulic, manual pump |
| Driven rolls | 3, gear motor, foot pedal control |
| Working position | Vertical or horizontal (body pivots 90°) |
| Round bar | max. 35 mm (min. Ø 500 mm) |
| Square bar | max. 35 mm (min. Ø 600 mm) |
| Round tube | max. 70 × 1.5 mm (min. Ø 1500 mm) |
| Square tube | max. 50 × 50 × 3 mm (min. Ø 1400 mm) |
| Dimensions | |
| Dimensions (L × W × H) | 1200 × 800 × 1750 mm |
| Weight | |
| Weight | 430 kg |
| Further data | |
| Emergency stop | 2 (control cabinet and foot pedal) |
| Hydraulic oil | HV 46 |
Scope of delivery
- PROMAC PB-50-3H section bending machine
- Foot pedal control with emergency stop
- Standard roll set (universal rolls) with spacers
- Spacer washers 1 mm
- Operating manual
Technical data
Additional data
- Intended use
- Kaltbiegen geeigneter Stäbe, Rohre und Konstruktionsprofile
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Severe crushing and entanglement hazards at the bending rollers and impact hazards from profiles swinging out. Keep a safe distance and bring the machine to a complete stop before making adjustments.
Product safety – PROMAC PB-50-3H profile bending machine. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Keep clear of entanglement and crushing points at the rollers, feed profiles in a controlled manner and cordon off the swing area of long workpieces; never reach between the rollers and the workpiece.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service