TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC SX-823DG Metal band saw
Item numberSX-823DG
6.543,81 € gross5.499,00 € netincl. VAT · Shipping costs
The PROMAC SX-823DG is a double-mitre metal band saw with 2 blade speeds of 36 and 72 m/min for mitres up to 60° right and 45° left. Cutting capacity 0° Ø 220 mm.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC SX-823DG is a metal band saw for workshops, metalworking and maintenance. It is mounted on a machine base with a working height of 847 mm and cuts mitres to both sides.
The 400 V three-phase motor works in 2 stages with 0.59 and 1.1 kW and drives the 2460 × 27 × 0.9 mm blade at 36 or 72 m/min through a 40:1 reduction gearbox. At 0° the saw cuts round stock up to Ø 220 mm and square stock up to 215 × 215 mm, at 45° right round stock up to Ø 150 mm and at 45° left up to Ø 135 mm.
The vice opens to 260 mm, and the blade wheels have a diameter of 295 mm. A 50 W coolant pump supplies the cutting point. The scope of delivery includes the machine base, control box, length stop, roller support, operating manual and spare parts list.
Features at a glance
- Mitre cuts up to 60° right and 45° left
- 2 blade speeds 36 / 72 m/min
- Cutting capacity 0° Ø 220 mm / 215 × 215 mm
- Vice opening 260 mm
- Length stop and roller support included
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 400 V |
| Phases | 3 |
| Blade motor output (2 speeds) | 0.59 / 1.1 kW (8- / 4-pole) |
| Coolant pump output | 50 W |
| Capacities | |
| Cutting capacity 0° round / square / rectangular | Ø 220 mm / 215 × 215 mm / 105 × 260 mm |
| Cutting capacity 45° right round / square / rectangular | Ø 150 mm / 145 × 145 mm / 70 × 155 mm |
| Cutting capacity 60° right round / square / rectangular | Ø 90 mm / 85 × 85 mm / 85 × 90 mm |
| Cutting capacity 45° left round / square / rectangular | Ø 135 mm / 110 × 110 mm / 45 × 160 mm |
| Gear reduction | 40:1 |
| Flywheel diameter | 295 mm |
| Blade size | 2460 × 27 × 0.9 mm |
| Blade speeds | 36 / 72 m/min |
| Vise opening | 260 mm |
| Saw arm opening | 40° |
| Dimensions | |
| Working height | 847 mm |
| Weight | |
| Net weight | 280 kg |
| Further data | |
| Sound pressure level (idle) | below 70 dB(A) |
Scope of delivery
- PROMAC SX-823DG metal band saw with machine stand (for assembly)
- Control box
- Length stop
- Roller support
- Operating manual
- Spare parts list
Technical data
Additional data
- Intended use
- Trennschnitte in sicher spannbaren Metallen und geeigneten Kunststoffen
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Severe cutting and amputation hazards and risks from tool breakage and workpiece ejection. Clamp the workpiece, use guards and fully disconnect from the mains before changing tools.
Product safety – PROMAC SX-823DG metal bandsaw. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely, correctly adjust guards and guides and keep hands out of the cutting line; remove offcuts only after a complete stop. Do not saw magnesium.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service