TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
Baileigh BG-679-3PH belt grinder
Item numberBG-679-3PH
2.735,81 € gross2.299,00 € netincl. VAT · Shipping costs
The Baileigh BG-679-3PH is a belt grinder with 3 kW drive for 2000 × 152 mm belts, 1200 m/min belt speed and integrated dust collection with blower.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The Baileigh BG-679-3PH is a belt grinder for deburring, dressing welds, chamfering and profile grinding of metal parts in metal fabrication, production and maintenance. A 3 kW (4 HP) three-phase motor drives the belt at 1200 m/min.
The machine uses 2000 × 152 mm belts. The contact wheel and the drive and alignment wheel each measure 250 × 152 mm. Grinding is done on the contact wheel as well as on the front and top work supports, belt tension is released with a lever and tracking is set with an adjuster.
A separate 0.55 kW blower motor extracts the grinding dust into a collection bag, a spark trap and an eye shield are fitted. An emergency stop button switches the machine off. Shipping weight is 130 kg, the operating manual is included.
Features at a glance
- Belt 2000 × 152 mm, 1200 m/min
- Belt motor 3 kW, blower motor 0.55 kW
- Contact wheel 250 × 152 mm
- Front and top work supports
- Dust collection with bag and spark trap
- Quick tension release and tracking adjuster
Technical data
Electrical data
- Power supply
- 400 V / 50 Hz / 3 phases
- Belt motor output
- 3 kW (4 HP)
- Blower motor output
- 0.55 kW (0.75 HP)
Machining data
- Belt size (L × W)
- 2000 × 152 mm
- Contact wheel
- 250 × 152 mm
- Drive / alignment wheel
- 250 × 152 mm
- Belt speed
- 1200 m/min
Dimensions
- Shipping dimensions (L × W × H)
- 1168 × 660 × 660 mm
Weight
- Shipping weight
- 130 kg
Delivery & scope of delivery
Scope of delivery
- Baileigh BG-679-3PH belt grinder
- Operating manual
Downloads
Operating manuals and spare-parts listsProduct safety
Rotating or cutting parts: entanglement, cutting, impact and workpiece-ejection hazards. Observe chips, sparks, dust and noise. Trained operators only; never exceed rated capacities.
Install the machine securely and operate it in accordance with the manual. Clamp the workpiece and tool correctly, use all guards and check the work area before starting. Wear eye or face protection, hearing protection and respiratory protection where required. Keep loose clothing, jewellery and long hair away from rotating parts. Switch off, isolate all energy sources and wait for a complete stop before setup, cleaning, fault removal or tool changes.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Tool France SAS9 rue des Pyrénées91090 LissesFranceService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service