Carbide circular saw blade for wood – fine cut 235 × 2.8/1.8 × 30 mm – 68 teeth – Fine ATB positive

Carbide circular saw blade for wood – fine cut 235 × 2.8/1.8 × 30 mm – 68 teeth – Fine ATB positive

Clean cross cuts and finish cuts. Coated panels | MDF | Plywood | Hardwood.

Technical data

• Dimensions Ø × kerf/plate × bore: 235 × 2.8/1.8 × 30 mm
• Number of teeth: 68
• Tooth form: Fine ATB positive
• Quality: HM
• Hook angle: positive
• Materials: Coated panels | MDF | Plywood | Hardwood
• Application: Clean cross cuts and finish cuts
• Machine use: Table, mitre and panel saw
• Speed note: Speed according to blade and machine marking

Price on request

Product safety

• Use only as intended in a suitable circular saw and for the specified materials. Blade diameter, bore, kerf, plate thickness, clamping flange, rotation direction and permitted speed must match the machine.
• Before every use, inspect the plate, bore, clamping faces, expansion slots and teeth for cracks, distortion, corrosion, missing tips or other damage. Do not use damaged, blunt or improperly resharpened blades.
• Switch off the machine before fitting, cleaning, adjustment or inspection, disconnect the power supply, secure against restart and wait for a complete stop.
• Clean the spindle, flanges and clamping faces. Fit the blade fully in the correct rotation direction without play in reducing rings; use only matching, undamaged flanges and approved reducing rings.
• Set the guard, riving knife and other protective devices according to the machine instructions. Never operate without effective guards or with an unsuitable riving knife.
• Fully support and securely guide or clamp the workpiece. Do not cut freehand; keep hands out of the cutting line and kickback zone. Feed evenly against the intended cutting direction.
• Wear safety glasses or a face shield and hearing protection; use suitable extraction. Do not wear gloves, loose clothing or jewellery, and secure long hair near rotating parts.
• Do not side-load, jam or brake the blade or place it on stationary workpieces. Do not set down or open the machine until the blade has stopped completely.
• Teeth, cut edges, workpieces and chips may be sharp and hot. Allow them to cool, store the blade protected and secure it against impact and contact during transport.
• Kickback hazard: account for knots, internal wood stress and inadequate workpiece guidance. Use only expressly nail-resistant versions for wood containing nails or fittings.
• Traceability is provided by article number TP_KSB-100052 and any batch marking on the label or packaging.

Manufacturer and EU responsible person

ToolParts-Group
Manufacturer and EU responsible economic operator
Kleinhaslach 35
90599 Dietenhofen
Germany
E-Mail: info@toolparts-service.biz
Tel.: +49 175 9967647
https://www.toolparts-group.com/