TOP DEAL
JET JWBS-18-M Band saw
JWBS-18-M2.831,01 €incl. VAT
2.379,00 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC BX-840VB Pillar drilling machine
Item numberBX-840VB
7.376,81 € gross6.199,00 € netincl. VAT · Shipping costs
The PROMAC BX-840VB is a 400 V floor drill press with frequency inverter, variable speed of 70 – 2000 rpm, tapping function and coolant system. Drilling capacity Ø 40 mm.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC BX-840VB is designed for drilling and tapping metal in workshops, trade businesses, maintenance and production. It drills up to Ø 40 mm and taps threads in the range M4 – M20. The throat is 300 mm and the quill stroke 145 mm.
The motor rated at 2.2 kW runs on 400 V, 3 Ph via a frequency inverter with braking resistor and provides variable speed of 70 – 2000 rpm, shown on a digital display. For tapping, the direction of rotation is reversed via the feed handle. The spindle has an MT4 taper.
The table measuring 400 × 470 mm and the base measuring 660 × 465 mm each have two T-slots, and the column measures Ø 115 mm. A coolant system with a 0.1 kW, 400 V, 3 Ph pump is built in. The overall height is 1900 mm and the net weight 300 kg. The machine is supplied with operating manual and spare parts list.
Features at a glance
- Frequency inverter with braking resistor
- Variable speed 70 – 2000 rpm with digital display
- Tapping function, reversal via feed handle
- Spindle taper MT4, quill stroke 145 mm
- Table 400 × 470 mm with T-slots
- Coolant system
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 400 V, 3 Ph |
| Phases | 3 |
| Motor output | 2.2 kW |
| Drive | Frequency inverter with braking resistor |
| Coolant pump | 0.1 kW, 400 V, 3 Ph |
| Capacities | |
| Drilling capacity | Ø 40 mm |
| Tapping capacity | M4 – M20 |
| Throat | 300 mm |
| Spindle taper | MT4 |
| Spindle stroke | 145 mm |
| Speed range (variable, 50 Hz) | 70 – 2000 rpm |
| Tapping function | Yes, reversal via feed handle |
| Column diameter | Ø 115 mm |
| Table | |
| Table size | 400 × 470 mm |
| Table T-slots | 2 |
| Base size | 660 × 465 mm |
| Base T-slots | 2 |
| Dimensions | |
| Overall height | 1900 mm |
| Pack size | 1160 × 570 × 2060 mm |
| Weight | |
| Net weight | 300 kg |
| Further data | |
| Speed display | Digital |
| Coolant system | Yes |
| Sound pressure level idle | LpA 62 dB(A) |
| Sound pressure level under load | LpA 64 dB(A) |
Scope of delivery
- PROMAC BX-840VB floor drill press
- Operating manual
- Spare parts list
Technical data
Additional data
- Intended use
- stationary drilling in machinable metals and suitable plastics
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC BX-840VB pillar drill. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service