TOP DEAL
JET JWBS-18-M Band saw
JWBS-18-M2.831,01 €incl. VAT
2.379,00 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC GHB-1330-FT Metal lathe
Item numberGHB-1330-FT
8.923,81 € gross7.499,00 € netincl. VAT · Shipping costs
The PROMAC GHB-1330-FT is an engine lathe for turning and drilling machinable metals and plastics. Distance between centres 760 mm, swing over bed 330 mm, main drive 1.5 kW (2 HP).
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC GHB-1330-FT Metal lathe is designed for turning and drilling operations on securely clamped machinable metals and suitable plastics. Variable or continuously variable speed adjustment. Digital display for controlled settings. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 400 V ~ 3L/PE, 50 Hz |
| Phases | 3 |
| Output power S1 | 1.5 kW (2 HP) |
| Operating current | 4 A |
| Power cord | H07RN-F 4 × 1.5 mm² |
| Installation fuse | 16 A |
| Capacities | |
| Swing over bed | 330 mm |
| Swing over cross slide | 197 mm |
| Distance between centres | 760 mm |
| Bed width | 186 mm |
| Spindle nose | DIN 55029 (Camlock) D1-4 |
| Spindle taper | MT5 |
| Spindle bore | 38 mm |
| Number of spindle speeds | 8 |
| Spindle speed range | 70 – 2000 rpm |
| Steady rest capacity | 6 – 67 mm |
| Follow rest capacity | 6 – 70 mm |
| Tailstock ram travel | 95 mm |
| Tailstock quill diameter | 32 mm |
| Tailstock taper | MT3 |
| Cross slide travel | 160 mm |
| Top slide travel | 68 mm |
| Max. tool size | 16 × 16 mm |
| Lead screw pitch | 4 mm |
| Longitudinal feeds (40) | 0.037 – 0.989 mm/rev |
| Cross feeds (40) | 0.01 – 0.268 mm/rev |
| Metric threads (23) | 0.45 – 10 mm |
| Inch threads (32) | 3 1/4 – 80 TPI |
| Dimensions | |
| Dimensions (L × W × H) | 1650 × 760 × 1200 mm |
| Weight | |
| Net weight | 600 kg |
| Further data | |
| Sound pressure level (idle at max. speed) | LpA 78.4 dB(A) |
Scope of delivery
- PROMAC GHB-1330-FT engine lathe
- Machine cabinet stand
- Chip tray
- Splash guard
- 3-jaw universal chuck 160 mm
- 4-jaw independent chuck 200 mm
- Faceplate 300 mm
- Four-way tool post
- Steady rest
- Follow rest
- Set of change gears
- 2 × MT3 fixed centre
- Centre sleeve MT3/MT5
- Threading dial
- Operating tools in tool box
- Oil can
- Lifting hook
- Operating manual
- Spare parts list
Technical data
Additional data
- Intended use
- Dreh- und Bohrarbeiten an sicher gespannten, zerspanbaren Metallen und geeigneten Kunststoffen
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, crushing and impact hazards at the chuck, workpiece and spindle. Remove the chuck key, avoid loose clothing and wait for a complete stop before measuring or setting up.
Product safety – PROMAC GHB-1330-FT metal lathe. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Securely fasten the workpiece and workholding devices, remove the chuck key, close guards and never wear gloves near rotating parts; secure long bars against whipping.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service