TOP DEAL
JET JWBS-18-M Band saw
JWBS-18-M2.831,01 €incl. VAT
2.379,00 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC JM-125-DRO Drilling and milling machine
Item numberJM-125-DRO
25.821,81 € gross21.699,00 € netincl. VAT · Shipping costs
The PROMAC JM-125-DRO is a milling machine with ISO 40 (7:24) spindle, digital readout and servo power feed in all three axes. Main drive 3 kW, table 1370 × 300 mm.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC JM-125-DRO Drilling and milling machine is designed for drilling and milling operations on machinable metals and suitable plastics. Coolant support for suitable applications. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Output power | 3 kW |
| Feed servo motor (torque) | 10 Nm |
| Output power coolant pump | 60 W |
| Capacities | |
| Spindle taper | ISO 40 (7:24) |
| Number of spindle speeds | 11 |
| Spindle speed range | 45 – 1660 rpm |
| Spindle to table | 160 – 500 mm |
| Throat | 100 – 500 mm |
| Face milling diameter | 125 mm |
| Drilling capacity steel | 32 mm |
| Drilling capacity cast iron | 40 mm |
| Table feed longitudinal / cross / vertical | 30 – 830 / 30 – 830 / 23 – 625 mm/min |
| Rapid traverse longitudinal / cross / vertical | 1335 / 1335 / 1000 mm/min |
| Table | |
| Table size (L × W) | 1370 × 300 mm |
| Travel X (longitudinal) | 1000 mm |
| Travel Y (cross) | 380 mm |
| Travel Z (vertical) | 400 mm |
| T-slots | 3 × 14 mm (spacing 80 mm) |
| Dimensions | |
| Overall dimensions | 1720 × 1680 × 1700 mm |
| Weight | |
| Net weight | 1750 kg |
| Further data | |
| Digital readout | Yes |
| Coolant system | Coolant tank in base |
| Lubrication | Feed gearbox oil bath, other parts manual oil pump |
| Noise level in operation | max. 85 dB(A) |
Scope of delivery
- PROMAC JM-125-DRO milling machine with digital readout
- Operating manual
Technical data
Additional data
- Intended use
- drilling and milling on machinable metals and suitable plastics
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Entanglement, cutting and crushing hazards at the rotating spindle and tool. Clamp the workpiece firmly, remove the chuck key and fully disconnect from the mains before any intervention.
Product safety – PROMAC JM-125-DRO drilling and milling machine. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely; remove the chuck key before starting, keep hands away from the spindle and tool, and remove chips only at standstill using a suitable aid.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service