TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
Baileigh RD-1000M radial drill
Item numberRD-1000M
12.731,81 € gross10.699,00 € netincl. VAT · Shipping costs
The Baileigh RD-1000M is a radial drill with 40 mm drilling capacity, 1000 mm reach, MT4 spindle and powered arm elevation.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The Baileigh RD-1000M is a radial drill for drilling large and heavy workpieces in steel, machine and vessel fabrication as well as maintenance. The drill head is mounted on an arm that swings around the column and is moved to the hole position while the workpiece stays in place. The spindle motor is rated 1.5 kW (2 HP), drilling capacity is 40 mm.
Reach ranges from 198 to 1000 mm, base to spindle distance from 262 to 1062 mm. The arm is raised and lowered by its own motor (0.55 kW) at 1200 mm/min and swings through 360°. The MT4 spindle runs in 6 steps from 75 to 1220 rpm, quill travel is 250 mm with 3 feed rates from 0.10 to 0.25 mm/rev. Maximum spindle torque 200 Nm, maximum feed force 6300 N.
Column and arm are locked with clamping levers, a box-type work table holds the workpiece. The coolant pump (0.09 kW) draws from the tank cast into the base. Weight is 1700 kg, the operating manual is included.
Features at a glance
- Drilling capacity 40 mm, MT4 spindle
- Reach 198 – 1000 mm
- 6 speeds 75 – 1220 rpm, 3 feed rates
- Powered arm elevation, 360° swing
- Box table and coolant system in the base
Technical data
Electrical data
- Power supply
- 400 V / 50 Hz / 3 phases
- Spindle motor output
- 1.5 kW (2 HP)
- Arm elevation motor
- 0.55 kW (0.75 HP)
- Coolant pump
- 0.09 kW
Machining data
- Drilling capacity
- 40 mm
- Column to spindle center
- 198 – 1000 mm
- Base to spindle
- 262 – 1062 mm
- Spindle travel
- 250 mm
- Spindle taper
- MT4
- Number of spindle speeds
- 6
- Spindle speed range
- 75 – 1220 rpm
- Number of feeds
- 3
- Feed range
- 0.10 – 0.25 mm/rev
- Arm elevating speed
- 1200 mm/min
- Arm rotation
- 360° (180° each way)
- Max. spindle torque
- 200 Nm
- Max. feed force
- 6300 N
Dimensions
- Shipping dimensions (L × W × H)
- 1880 × 991 × 2362 mm
Weight
- Weight
- 1700 kg
Delivery & scope of delivery
Scope of delivery
- Baileigh RD-1000M radial drill
- Operating manual
Downloads
Operating manuals and spare-parts listsProduct safety
Rotating or cutting parts: entanglement, cutting, impact and workpiece-ejection hazards. Observe chips, sparks, dust and noise. Trained operators only; never exceed rated capacities.
Install the machine securely and operate it in accordance with the manual. Clamp the workpiece and tool correctly, use all guards and check the work area before starting. Wear eye or face protection, hearing protection and respiratory protection where required. Keep loose clothing, jewellery and long hair away from rotating parts. Switch off, isolate all energy sources and wait for a complete stop before setup, cleaning, fault removal or tool changes.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Tool France SAS9 rue des Pyrénées91090 LissesFranceService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service