TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
Baileigh PL-1236E-DRO metal lathe with DRO
Item numberPL-1236E-DRO
10.474,00 € gross8.801,68 € netincl. VAT · Shipping costs
The Baileigh PL-1236E-DRO is a metal lathe with digital readout, 305 mm swing, 914 mm between centres, 38 mm spindle bore and a 1.1 kW motor for 230 V.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The Baileigh PL-1236E-DRO is a lathe for turning work in workshops, maintenance and training. A 1.1 kW motor for 230 V, 50 Hz, 1 phase drives the spindle (D1-4 nose, MT5 taper, 38 mm bore) in 9 steps from 70 to 1400 rpm. A digital readout makes it easier to read the slide positions.
Swing is 305 mm over the bed, 194 mm over the cross slide and 431 mm in the gap, distance between centres 914 mm with a bed width of 181 mm. The compound slide travels 83 mm, the cross slide 135 mm, the tool post takes tools up to 16 × 16 mm. The tailstock quill has a diameter of 32 mm, 101 mm travel and MT3 taper.
Shipping weight is 560 kg. The operating manual is included.
Features at a glance
- Digital readout
- Swing 305 mm over bed, 431 mm in the gap
- 914 mm between centres
- Spindle bore 38 mm, D1-4 spindle nose
- 9 speeds 70 – 1400 rpm
- Motor 1.1 kW, 230 V, 50 Hz, 1 phase
Technical data
Electrical data
- Power supply
- 230 V / 50 Hz / 1 phase
- Motor output
- 1.1 kW
Machining data
- Swing over bed
- 305 mm
- Swing over cross slide
- 194 mm
- Swing in gap
- 431 mm
- Distance between centres
- 914 mm
- Bed width
- 181 mm
- Spindle nose
- D1-4
- Spindle bore
- 38 mm
- Spindle taper
- MT5
- Spindle speeds
- 9 steps, 70 – 1400 rpm
- Top slide travel
- 83 mm
- Cross slide travel
- 135 mm
- Max. tool size
- 16 × 16 mm
- Tailstock quill diameter
- 32 mm
- Tailstock quill travel
- 101 mm
- Tailstock taper
- MT3
Dimensions
- Shipping dimensions (L × W × H)
- 1701 × 787 × 1524 mm
Weight
- Shipping weight
- 560 kg
Delivery & scope of delivery
Scope of delivery
- Baileigh PL-1236E-DRO metal lathe with digital readout
- Operating manual
Downloads
Operating manuals and spare-parts listsProduct safety
Rotating or cutting parts: entanglement, cutting, impact and workpiece-ejection hazards. Observe chips, sparks, dust and noise. Trained operators only; never exceed rated capacities.
Install the machine securely and operate it in accordance with the manual. Clamp the workpiece and tool correctly, use all guards and check the work area before starting. Wear eye or face protection, hearing protection and respiratory protection where required. Keep loose clothing, jewellery and long hair away from rotating parts. Switch off, isolate all energy sources and wait for a complete stop before setup, cleaning, fault removal or tool changes.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Tool France SAS9 rue des Pyrénées91090 LissesFranceService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service