TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC 348C Metal band saw
Item number348C
772,31 € gross649,00 € netincl. VAT · Shipping costs
The PROMAC 348C is a lightweight metal band saw with stand for straight and mitre cuts, vertical or horizontal. Cutting capacity 90° Ø 100 mm, blade speed 45 m/min, weight 23 kg.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC 348C Metal band saw is designed for cut-off operations in securely clampable metals and suitable plastics. Variable or continuously variable speed adjustment. Quick-clamping equipment for efficient workpiece handling. The assigned original documentation governs setup, performance limits and safe use.
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 230 V, 50 Hz |
| Phases | 1 |
| Output power | 0.38 kW |
| Operating current | 4 A |
| Motor speed | 1430 rpm |
| Power cord | with mains plug |
| Installation fuse | min. 10 A |
| Capacities | |
| Blade size | 1467 × 13 × 0.65 mm |
| Blade speed | 45 m/min |
| Cutting capacity 90° round / rectangular | Ø 100 mm / 100 × 150 mm |
| Cutting capacity 45° round / rectangular | Ø 60 mm / 60 × 90 mm |
| Dimensions | |
| Dimensions (L × W × H) | 735 × 395 × 460 mm |
| Weight | |
| Net weight | 23 kg |
| Further data | |
| Sound pressure level | below 70 dB |
| Automatic shut-off | limit switch at end of cut |
Scope of delivery
- PROMAC 348C metal band saw with base
- 1 × stop rod
- 1 × blade guide (blade guard)
- Operating manual
Technical data
Additional data
- Intended use
- Trennschnitte in sicher spannbaren Metallen und geeigneten Kunststoffen
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Severe cutting and amputation hazards and risks from tool breakage and workpiece ejection. Clamp the workpiece, use guards and fully disconnect from the mains before changing tools.
Product safety – PROMAC 348C metal bandsaw. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely, correctly adjust guards and guides and keep hands out of the cutting line; remove offcuts only after a complete stop. Do not saw magnesium.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service