TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC SX-815DA Metal band saw
Item numberSX-815DA
1.159,06 € gross974,00 € netincl. VAT · Shipping costs
The PROMAC SX-815DA is a metal band saw with stand for straight and mitre cuts from 0 to 60° right. Cutting capacity 90° Ø 150 mm, blade speed 65 m/min.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC SX-815DA is a metal band saw for workshops, trades, metalworking and maintenance. It stands on a machine stand with transport wheels, so it can be moved around the workshop. The working height is 880 mm.
The 0.375 kW, 230 V motor drives the 1735 × 12.7 × 0.9 mm blade at 65 m/min, and the blade wheels have a diameter of 244 mm. At 90° the saw cuts round stock up to Ø 150 mm and rectangular sections up to 150 × 165 mm, at 45° round stock up to Ø 115 mm.
The mitre range extends from 0 to 60° to the right. The saw is operated via a handle with trigger. The saw is supplied with a blade, operating manual and spare parts list.
Features at a glance
- Mitre range 0 – 60° right
- Cutting capacity 90° Ø 150 mm / 150 × 165 mm
- Blade speed 65 m/min
- Machine stand with transport wheels
- Working height 880 mm
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 230 V |
| Motor output | 0.375 kW |
| Installation fuse | min. 10 A |
| Capacities | |
| Cutting capacity 90° round / rectangular | Ø 150 mm / 150 × 165 mm |
| Cutting capacity 45° round / rectangular | Ø 115 mm / 130 × 115 mm |
| Cutting capacity 60° round / rectangular | Ø 70 mm / 70 × 70 mm |
| Mitre range | 0 – 60° right |
| Blade speed | 65 m/min |
| Blade size | 1735 × 12.7 × 0.9 mm |
| Wheel diameter | 244 mm |
| Dimensions | |
| Working height | 880 mm |
| Dimensions (L × W × H) | 1100 × 390 × 1650 mm |
| Weight | |
| Net weight | 52 kg |
| Shipping weight | 56 kg |
| Further data | |
| Sound pressure level (idle) | below 70 dB(A) |
Scope of delivery
- PROMAC SX-815DA metal band saw with stand
- Saw blade
- Operating manual
- Spare parts list
Technical data
Additional data
- Intended use
- Trennschnitte in sicher spannbaren Metallen und geeigneten Kunststoffen
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Severe cutting and amputation hazards and risks from tool breakage and workpiece ejection. Clamp the workpiece, use guards and fully disconnect from the mains before changing tools.
Product safety – PROMAC SX-815DA metal bandsaw. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely, correctly adjust guards and guides and keep hands out of the cutting line; remove offcuts only after a complete stop. Do not saw magnesium.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service