TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
PROMAC SY-315 Metal circular saw
Item numberSY-315
3.985,31 € gross3.349,00 € netincl. VAT · Shipping costs
The PROMAC SY-315 is a metal cold saw with stand for profiles and lighter workpieces. Blade Ø 315 mm, 2 speeds 44 / 88 rpm, motor 1.3 kW for 400 V.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The PROMAC SY-315 is designed for sawing machinable metals and plastics. With blade speeds of 44 / 88 rpm it is intended for profiles and lighter workpieces and suits workshops, locksmithing and metal construction.
The 1.3 kW three-phase motor is connected to 400 V and drives the Ø 315 mm blade with 32 mm bore via a gearbox. At 90° the saw cuts solid stock up to Ø 50 mm, tubes up to Ø 100 mm and rectangular sections up to 110 × 70 mm. At 45° tubes up to Ø 90 mm and square stock up to 80 × 80 mm can be cut.
The vice opens to 120 mm. A 0.1 kW coolant pump with a 5 l tank supplies the cutting point. Supplied with stand, stop, roller support, operating manual and spare parts list.
Features at a glance
- 2 blade speeds 44 / 88 rpm
- Blade Ø 315 mm, bore Ø 32 mm
- Cutting capacity 90° tube Ø 100 mm / 110 × 70 mm
- Mitre cuts at 45°
- Coolant system with 5 l tank
Product safety
- Use only as intended, within the stated limits and in accordance with the complete operating instructions.
- Operation is restricted to trained adults; keep guards and emergency-stop devices fully functional.
- Before adjustment, cleaning, fault clearing or maintenance, switch off, isolate the power supply and prevent restart.
- Wear the prescribed personal protective equipment and clamp or guide the workpiece in accordance with the instructions.
Technical data
| Electrical | |
|---|---|
| Voltage | 3~ 400 V, PE, 50 Hz |
| Phases | 3 |
| Main motor output | 1.3 kW |
| Coolant pump output | 0.1 kW |
| Capacities | |
| Saw blade (outer Ø / bore) | Ø 315 / Ø 32 mm |
| Blade speeds | 44 / 88 rpm |
| Cutting capacity 90° solid round / tube | Ø 50 mm / Ø 100 mm |
| Cutting capacity 90° square / rectangular | 82 × 82 mm / 110 × 70 mm |
| Cutting capacity 45° solid round / tube | Ø 50 mm / Ø 90 mm |
| Cutting capacity 45° square / rectangular | 80 × 80 mm / 85 × 70 mm |
| Vise opening | max. 120 mm |
| Dimensions | |
| Dimensions (L × W × H) | 1020 × 990 × 1830 mm |
| Weight | |
| Net weight with stand | 170 kg |
| Further data | |
| Coolant tank | 5 l |
| Gearbox oil quantity | 0.3 l |
| Sound pressure level (idle) | LpA 70.0 dB(A) |
| Application | profiles and lighter workpieces |
Scope of delivery
- PROMAC SY-315 metal cold saw with stand
- Stop
- Roller support
- Operating manual
- Spare parts list
Technical data
Additional data
- Intended use
- präzise Trenn- und Gehrungsschnitte in sicher gespannten Metallprofilen
- Product type
- Machine
Downloads
Operating manuals and spare-parts listsProduct safety
WARNING: Severe cutting and amputation hazards and risks from tool breakage and workpiece ejection. Clamp the workpiece, use guards and fully disconnect from the mains before changing tools.
Product safety – PROMAC SY-315 metal circular saw. • Use only as intended, within the documented performance limits and in accordance with the complete original documentation; operation is restricted to instructed adults. • Before each use, check the machine, mounting, guards, switching devices and power cable; do not operate damaged or incomplete products. • Ensure stable positioning, a clear work area, adequate lighting and the power supply specified on the rating plate; electrical work must be carried out only by qualified specialists. • Before setting up, changing tools, clearing faults, cleaning or maintenance, switch off, disconnect from the mains, wait for a complete stop and secure against restarting. • Wear close-fitting clothing, eye protection and suitable hearing protection; remove jewellery and secure long hair. Never remove or bypass guards. • Clamp the workpiece securely, correctly adjust guards and guides and keep hands out of the cutting line; remove offcuts only after a complete stop. Do not saw magnesium.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Christian Satter, ToolParts-Group / ToolParts-ServiceKleinhaslach 3590599 DietenhofenGermanyService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service