TOP DEAL
JET JWBS-15-M Band saw
JWBS-15-M2.338,05 €incl. VAT
1.964,75 € net, VAT extra · plus shipping costs
VIEW OFFER 
Baileigh HSP-100A shop press
Item numberHSP-100A
7.138,81 € gross5.999,00 € netincl. VAT · Shipping costs
The Baileigh HSP-100A is a hydraulic shop press with 89 t capacity, two air motors and a two-stage hand pump.
AvailableAvailable ex works
Delivery / availability: Delivery time 5–7 working days. The period starts after conclusion of the contract or, for agreed prepayment, after your payment instruction. Delivery by freight carrier to the kerbside, without installation or carrying the goods into the building or to their intended location. A telephone number is required to arrange delivery. Please refuse delivery if there is obvious transport damage and contact us. Have visible damage recorded on the consignment note. CMR is the convention governing international carriage of goods by road; for these shipments, the CMR consignment note serves as evidence of transport. Refusing delivery is not a general CMR requirement. Statutory consumer rights remain unaffected even if the goods are accepted.
Stock sourceAvailable ex works
Customer groupPurchase: businesses and private customers
In use
Overview
The Baileigh HSP-100A is a hydraulic shop press for machine and commercial vehicle workshops, maintenance and metal fabrication. It is used to press bearings, bushings and pins in and out and for straightening and bending heavy components.
The maximum capacity is 89 t at a hydraulic system pressure of 63.7 MPa. The cylinder has a stroke of 300 mm and covers a working width of 787 mm, the working range is 93 to 933 mm.
Two air motors extend the piston rapidly without load, under load one motor continues at slow speed. Alternatively, the two-stage hand pump is used: low pressure for fast and high pressure for slow movement. A three-position selector valve controls extending, holding and retracting. Ram and working bed are each adjusted by crank via worm drives.
Supplied with pump assembly with air foot valve, crank handle, pump handle and selector lever, bases, supports, pins, two heel blocks, hardware and the operating manual.
Features at a glance
- Capacity 89 t, hydraulic pressure 63.7 MPa
- Cylinder stroke 300 mm, working width 787 mm
- Working range 93 – 933 mm
- Two air motors with foot valve
- Two-stage hand pump and 3-position selector valve
- Ram and bed adjustable by crank
Technical data
Machining data
- Max. capacity
- 89 t
- Hydraulic system pressure
- 63.7 MPa
- Moveable cylinder
- yes
- Working width
- 787 mm
- Cylinder stroke
- 300 mm
- Cylinder diameter
- 165 mm
- Piston rod diameter
- 101 mm
- Piston head diameter
- 89 mm
- Working range (bed to ram)
- 93 – 933 mm
Additional data
- Drive
- hydraulic, 2 air motors or two-stage hand pump (high/low pressure)
- Air fitting
- ¼″ NPT
- Air pressure
- 7.5 – 13.8 bar
- Bed adjustment
- crank with worm drive
- Ram moving
- crank with worm drive
- Hydraulic oil
- hydraulic jack oil 22 (ISO 6743)
Dimensions
- Shipping dimensions (L × W × H)
- 2058 × 1143 × 534 mm
Weight
- Shipping weight
- 775 kg
Delivery & scope of delivery
Scope of delivery
- Baileigh HSP-100A shop press (body frame with assembled ram, oil tank, pressure gauge, ram moving equipment and bed lifting equipment)
- 1 × working bed (assembled in frame)
- 1 × pump assembly with air foot valve
- 1 × crank handle
- 1 × selector valve lever
- 1 × pump handle tube
- 2 × bases
- 4 × supports
- 4 × pins
- 8 × circlips
- 2 × heel blocks
- Hardware: hex bolts M12 × 30 mm and M12 × 25 mm, spring washers M12, washers M12
- Operating manual with parts list
Downloads
Operating manuals and spare-parts listsProduct safety
Crushing, shearing, cutting, punching and entanglement hazards at tooling, rolls and moving machine parts. Handle sharp and heavy workpieces safely. Trained operators only; never exceed rated capacities.
Secure the machine and use it only within the material and capacity limits stated in the manual. Guide or support the workpiece safely. Keep hands clear of bending, pressing, cutting, punching and pinch zones and use suitable handling aids. Wear eye protection, safety footwear and cut-resistant gloves when handling material. Stop the machine and isolate all energy sources before adjustment, tooling changes, cleaning or maintenance.
Manufacturer
JPW Industries, Inc.427 New Sanford Rd37086 La Vergne, TNUnited StatesEU economic operator
Tool France SAS9 rue des Pyrénées91090 LissesFranceService & spare parts
Technical documents, spare-parts identification and repair support remain permanently available through ToolParts-Service.
Open technical service